B6V8+ DC 50W RC BATTERY charger BALANCER

INPUT VOLTAGE DC 11-18V CHARGE/DISCHARGE POWER 50W/5W CHARGE/DISCHARGE CURRENT 5A/1A WITH COOLING FANS

Specifications:

 

 

B6V8 balance charger with cooling fans Max. charge power 50W, voltage range: DC11.0~18.0 V 1-6s lithium battery appealing

 

 

B6 V8 Lipo balance charger (Model: FFL-B6 V8),

Newest! Circuit power: Max. charge power 50W, voltage range: DC 11.0~18.0 Voltage

 

 

 

Specification
Operating voltage	DC 11~18 volts
Idling current	approx. 100mA
Charge/discharge power	max. 50/5W
NiCd/MH	1~15 cells
LiIo/LiPo/LiFe	1~6 series
Pb	2~20V
Charge current	0.1 to 5.0A
Discharg current	0.1 to 1.0A
No. of cycle	1 to 5 times
Battery data memory	up to 5 data
Weight	260g
Dimension	117x85.5x30 mm

 

 

 

 

User's setting-up parameters
Lithium battery voltage type	LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity	5 to 20mV
NiMH Delta-peak voltage sensitivity	5 to 20mV
Battery temperature cut-off	20 to 80C or OFF
Waste time between charge/discharge	1 to 60 min.
Trickle charge mode	ON/OFF, up to 200mA
Integral timer limit for safety	10 to 720 min.or OFF
Maximum charging capacity limit for safety	10 to 9990mAh or OFF
Key beep and buzzer sound	ON/OFF
Input power low alert	10 to 11V

 

 

 

Welcome you orders!

 

 

→Operating software

 

          Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning.

 

 

→Individual voltage balancer for Lithium batteries

 

          B6 V8 has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.

 

 

→Accept various types of Lithium battery

 

       B6 V8 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

 

 

→Lithium battery 'Fast' and 'Storage' mode

 

        You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.

 

  

 

→Data store/load

 

         For users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

 

 

→Cyclic charging/discharging

 

         Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

 

 

→PC based analysis using USB communication

 

        For technical expert, B6 V8 offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

 

 

 

B6V8+ DC 50W RC BATTERY charger BALANCER